Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Baltimore Homeowners
When an automatic gate stops responding, the property is left open to anyone who walks up. That’s the real problem behind a dead operator, a gate stuck halfway, or a keypad that no longer recognizes a code. Baltimore Gate Repair has handled electric gate repair in Baltimore since 2016, and every call, technician, and truck we send is dedicated to gate systems alone. We’re gate specialists, not generalists; the person who shows up knows operator wiring as well as the mechanical side of the gate. Call (855) 356-2557 for a free estimate. Same-day service is often possible, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday.
You’ll find the details across our Baltimore Gate Repair pages, but start here for the automation side of the job.
Gate Opener Repair
Gate Opener Repair is the work of finding out why the arm, operator, or control box has stopped moving the gate and putting it right, and it’s what most of our Baltimore calls come down to. You need it when the gate hums but doesn’t move, reverses before it closes, or opens only when you hold the remote close to the receiver. We test the operator, the limit switches, the safety edges, and the wiring before we quote anything, and the written estimate is what you pay. A typical opener repair in Baltimore runs $180-$420 depending on the operator and the fault. If the unit is past saving, we’ll tell you plainly and price a replacement instead.
Why an Opener Stops Mid-Travel
An opener that stalls halfway usually has a limit switch out of adjustment, a weak battery in a backup unit, or a binding hinge on the gate leaf itself. The operator is often blamed for a gate that no longer swings freely. We check the gate’s movement first so we don’t sell you a control board the gate never needed.
Remote and Receiver Faults
A remote that works only from a few feet away points to a failing receiver or an antenna wire that’s come loose. We replace or reprogram the receiver and re-pair your remotes. We work on FAAC, Linear, and Viking equipment and know where each one tends to fail.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the whole system that makes a gate open on its own: the operator, the wiring, the sensors, and the controls that tie them together. You call for it when the gate moves on its own, ignores the safety edge, or stops opening for one car and works for another. We handle both swing and slide gates, residential and commercial, and we diagnose the mechanical and electrical sides together rather than guessing. Our electric gate repair page covers the full range of automation faults. Most automatic gate repairs in Baltimore fall between $200 and $600 depending on parts and access. The estimate is free and the price is agreed before any work starts.
Safety Edge and Sensor Problems
A gate that stops and reverses on nothing is usually reading a photo-eye or safety edge that’s dirty, misaligned, or water-logged. We test each sensor and replace the failed one. Never ignore a reversing gate: it’s a crush risk, and a trained technician should check it.
Control Board and Wiring Diagnosis
Low-voltage wiring fails quietly, especially where it’s buried or run through a wet post. We meter the run and find the break instead of swapping boards on a hunch. That crossover skill between gate mechanics and automation is where a specialist saves you money.
Electric Gate Motor
The Electric Gate Motor is the drive unit that does the actual pushing and pulling, and it’s the part that wears out first on a gate that runs several times a day. You need motor work when the gate moves slowly, grinds, or trips its overload on warm afternoons. We open the unit, check the motor brushes and bearings, and tell you whether a rebuild or a new operator is the better spend. BFT and FAAC operators are common around Baltimore, and we work on both. Motor and operator work typically runs $250-$750 depending on the unit and whether the gate itself needs adjusting. Every price is quoted in writing first.
Slow, Grinding, or Overheating Units
A motor that’s hot to the touch after a few cycles is working against friction it shouldn’t have. We free up the gate travel and check the operator’s gearing. Left alone, an overheating motor will burn out and take the control board with it.
Manual Release and Backup
Every automatic gate needs a working manual release for a power failure or an emergency. We test yours during the visit and repair it if the key won’t turn or the arm won’t disengage. A release that won’t work is a safety problem, not a convenience one.
Gate Access Control
Gate Access Control is the layer that decides who gets in: keypads, card readers, intercoms, loop detectors, and the phone or app entry that ties them together. You need it looked at when codes stop working, the keypad beeps but won’t open, or a delivery driver can’t reach you. We install and repair access control on residential and commercial gates, and we work with DoorKing and Linear equipment where the entry system and the operator talk to each other. Access control repair in Baltimore typically runs $150-$500 depending on the device and wiring. Free estimate, and the written price is set before we touch a thing.
Keypads, Readers, and Intercoms
A keypad that lights up but won’t open is often a wiring or controller issue behind the post, not the pad itself. We test the whole chain. Card readers and intercoms get the same treatment, so you’re not paying to replace a working unit.
Entry Systems for Shared Drives
Shared driveways and gated communities need entry systems that stay working for dozens of residents. We repair the controller and re-issue codes so access stays controlled. That matters most when someone moves out and the old code is still live.
Commercial Gate Operator
A Commercial Gate Operator is built for high cycle counts, and it fails differently from a residential unit: worn cams, tired brakes, and loop detectors that stop sensing trucks. You need commercial service when the gate hesitates at peak times, the loop won’t pick up a vehicle, or the barrier arm drops without warning. We service commercial slide, swing, and barrier-arm operators across Baltimore, and we know LiftMaster and DoorKing commercial lines. Commercial operator repair usually runs $300-$900 depending on the operator and the fault. Estimates are free and scheduled around your traffic, not the other way around.
High-Cycle Wear and Service
An operator running hundreds of cycles a day wears its brake and gearing faster than a home gate ever will. We inspect those parts and tell you what’s close to failing. That way a busy entrance doesn’t go down without warning.
Loop Detectors and Traffic Flow
A buried loop that no longer senses a car leaves the gate open or the arm down at the wrong moment. We test the loop and its detector and repair the fault. Traffic flow and safety depend on it working every cycle.
Brands We Service
We work on the brand you already have. FAAC operators are common on residential swing and slide gates, and we know their control boards and how they handle safety-edge input. BFT equipment turns up on heavier residential gates, and we’re familiar with its motor and limit-switch behavior. Linear covers a lot of access control and operator work, so we see it often on keypads and receivers. Viking operators show up on both home and light commercial gates, and we know where they wear. We’re independent and experienced with each of these, not tied to any one maker.
Whether you have FAAC, BFT, Linear, or Viking, or a gate with a brand we haven’t listed, we can help. Bring the model info if you have it and we’ll sort the rest on site. For nearby service, our electric gate repair and electric gate repair pages cover those areas.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate reverses on nothing. A photo-eye or safety edge that’s misaligned or dirty makes the gate think something’s in the way. Reversing gates are a crush risk on heavy leaves, so have them checked before someone gets hurt.
- The operator hums but the gate doesn’t move. That points to a seized motor, a broken gear, or the gate binding on its hinges. Running it anyway can burn out the motor and the board.
- The keypad or remote stopped working. It could be the pad, the receiver, or the wiring behind it. A quick diagnosis saves you from buying parts you don’t need.
- The gate drags or scrapes. Friction in the gate travel makes the operator work harder and shortens its life. It’s often a hinge or track issue, not the motor.
- The manual release won’t turn. If you can’t open the gate by hand in a power failure, you’re stuck. That’s an immediate safety fix, so call us and we’ll get it working.
Our Process, Step by Step
- 1
You call and we ask the right questions. We want to know the gate type, the operator brand, and what it’s doing or not doing. That helps us arrive with the parts your system likely needs, so there’s less back-and-forth.
- 2
We diagnose on site. We test the operator, meter the wiring, check the sensors and safety edges, and watch the gate move. We look at the mechanical travel as well as the automation, because one often explains the other.
- 3
You get a written estimate. We explain what’s wrong and what it costs to fix, in plain terms. The price is quoted and agreed before any work starts, so there are no surprise invoices.
- 4
We do the repair. We carry brand-specific parts for the operator lines we work on and handle both the mechanical and low-voltage sides. If a part has to be ordered, we tell you the timing up front.
- 5
We test and walk you through it. We cycle the gate, check the safety features, and make sure your remotes and entry codes work. You leave knowing exactly what was fixed and why.
How Much Does Electric Gate Repair Cost in Baltimore?
Most electric gate repairs in Baltimore run between $150 and $900 depending on the fault, the operator brand, and whether parts have to be ordered. Here’s how that breaks down by common scenario:
| Repair Type | Typical Estimated Range |
|---|---|
| Gate opener repair (limit switch, receiver, remote) | $180-$420 |
| Automatic gate repair (sensors, control board, wiring) | $200-$600 |
| Electric gate motor or operator work | $250-$750 |
| Gate access control repair | $150-$500 |
| Commercial gate operator repair | $300-$900 |
What affects the price is the operator brand, how accessible the wiring is, whether the gate itself needs adjustment, and whether the fault is a simple part or a failing unit. You avoid overpaying by getting a written estimate that names the parts and the labor before work begins. Our free estimate includes the diagnosis, the cause, and the fix, and the price is agreed before we start. If a repair doesn’t make sense against the cost of a new operator, we’ll tell you honestly.
Our Service Area Near Baltimore
We serve Baltimore and the surrounding communities, including Honeygo, Kingsville, Gambrills, Herald Harbor, Pleasant Hills, North Laurel, Fulton, West Laurel, Sykesville, Abingdon, and Konterra. Dispatch times vary with traffic and location, but we cover the whole area. Same-day service is often possible, and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. Our electric gate repair page and electric gate repair page cover those areas in more detail, and we can also help with gate repair and gate installation.
Serving Baltimore, MD – Our Local Coverage Area
We serve Baltimore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Baltimore
Electric gate repair is the work of diagnosing and fixing the automation on an automatic gate, from the operator and motor to the wiring, sensors, and access controls. It covers both the mechanical movement of the gate and the low-voltage side that controls it. In Baltimore, that means swing and slide gates on homes and commercial properties. If your gate has stopped responding or is behaving unpredictably, that’s the service you need.
Most repairs are finished in a single visit, typically one to three hours depending on the fault and whether parts are on the truck. Simple fixes like a remote, receiver, or sensor often take under an hour. If a part needs ordering, we tell you the timing up front. We carry brand-specific parts for the operators we work on, which cuts waiting.
Typical electric gate repairs in Baltimore run $150-$900, with most falling in the $200-$600 range depending on the operator and the fault. Opener repair usually runs $180-$420, and motor work $250-$750. The estimate is free, and the written price is agreed before any work starts. Call (855) 356-2557 for an exact quote; estimates are free.
Yes, we service FAAC and BFT equipment, and we’re familiar with where each wears and how its controls behave. We also work on Linear and Viking, along with other major operator lines. Our technicians carry parts and diagnostic know-how for these brands. If you’re unsure of your model, we can identify it on site.
Same-day service is often possible for electric gate repair in Baltimore. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday, closed Saturday. A call outside dispatch hours is booked into the next opening. We bring the parts your system likely needs to keep the visit short.
Warranty terms on parts and labor vary by job, so we don’t quote one over the phone. We’ll explain the coverage in writing with your estimate so you know exactly what’s covered. Ask us at the time of the repair and we’ll lay it out. That way there are no surprises later.
Have your gate and entry codes, your remotes, and any operator model info ready, and clear access to the operator and control box. If you know when the problem started, tell us. That helps us diagnose faster. Then let us handle the rest; we test the gate and safety features before we leave.
Schedule Your Electric Gate Repair Service in Baltimore Today
Don’t leave a broken gate sitting open or stuck shut. Baltimore Gate Repair handles electric gate repair across Baltimore and the surrounding communities, with free estimates and a written price agreed before work starts. Call (855) 356-2557. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday. Nine brands. One specialist. Let’s get your gate back up and running today.
Written by Glenn Fitzgerald, Owner at Baltimore Gate Repair, serving Baltimore since 2016.