Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Baltimore
If your driveway gate has stopped opening, is dragging on the ground, or the operator has gone silent, you’re in the right place. Call (855) 356-2557 and we’ll get a specialist out to look at it. Baltimore Gate Repair is a gate-only shop. Every call, every technician, every truck is dedicated to gates – not fencing, not garage doors. We service manual and automatic gates across Baltimore, we work on the brand you already have, and we quote the price in writing before any work starts. Most gate failures we see here come down to the same local forces: freeze-thaw cycle, settling brick, and decades of paint, and we know exactly what to look for.
Key takeaways:
- Gate specialists, not generalists – we handle repair, electric gate repair, and installation under one roof.
- Nine brands. One specialist. We service LiftMaster, FAAC, BFT, Linear, and more.
- Free estimates. The written price is agreed before we start.
Why Baltimore Homeowners Call Baltimore Gate Repair for Gate Repair
We’ve built a strong local reputation in Baltimore by doing one thing and doing it thoroughly. Homeowners and property managers call us because the person who shows up actually knows the equipment. Nine brands sit at the core of what we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – and we carry the diagnostic tools and replacement parts that a general handyman just doesn’t keep on the truck.
Our reviews from Baltimore customers reflect the same thing we hear on the phone: no guessing, no second trips, and a clear price before we touch anything. Electric or manual, we diagnose both sides of the problem. That matters here, where a wrought-iron gate might be mechanically seized and electrically fine, or the reverse. Reaching Baltimore from our home base is straightforward, and we book same-day slots where the schedule allows. Call (855) 356-2557. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Baltimore
Driveway Gate Repair in Baltimore often means untangling a gate that has been fighting its own hinges for years. In the city’s older neighborhoods, heavy wood and iron driveway gates swing on hardware that has taken a beating from humidity, ground movement, and repainting. A typical driveway gate repair in Baltimore runs $180 to $350 for hinge and latch work, and $250 to $600 when alignment and post work is involved. The written estimate you get before we start sets the final price.
Realigning a Gate That Drags
Sagging almost always traces back to a post that has shifted, not a gate that grew heavier. Freeze-thaw cycles push the post footing around and the gate starts to bind on its swing. We reset the footing and true the gate back to level so it swings clean again.
Hinge and Latch Repair
Seized hinges get freed, re-pinned, or replaced depending on how far the corrosion runs. Latches on original iron gates are where things get interesting in this city – see the welding section below for why.
Gate Welding in Baltimore
Gate Welding in Baltimore keeps a lot of historic iron alive that would otherwise be scrapped. On cast-iron and wrought-iron gates, welding means repairing cracked frames, rebuilding worn hinge eyes, and reattaching posts that have pulled loose from old brick. A welded repair in Baltimore typically runs $200 to $500 depending on the amount of fabrication. Small stitch welds sit at the low end; a rebuilt hinge eye or a fabricated latch pushes higher. It’s usually far less than a full replacement gate.
Repairing Historic Cast-Iron Gates
In neighborhoods like Canton and Fells Point, original cast-iron gates on old sea captains’ houses often have custom latches that can’t be replaced off-the-shelf. Some of these dates back well over a hundred years and the latch was likely made by hand. So we fabricate the part or find a match at a local architectural salvage yard – a constraint you rarely run into in newer suburban developments.
Rust Repair and Refinishing Prep
Rust gets ground back to sound metal before any weld or finish goes on, otherwise the repair fails at the seam. We treat the source, prep the surface, and leave it ready for paint or a protective coating.
Trusted Brands We Service in Baltimore
We keep local parts for Baltimore customers so turnaround stays fast. The brands we know inside and out include LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from a budget residential swing gate to a high-cycle commercial slide operator. FAAC and BFT operators show up on a lot of automatic driveway gates around Baltimore, and Linear and Viking boards come through regularly too. Because we stock the common components, most repairs are done on the first visit instead of waiting on a part order. We work on the brand you already have.
Common Gate Repair Problems We See in Baltimore Homes
- Hinge post settlement from freeze-thaw cycles. Baltimore’s winters push posts up and settle them back, and narrow row-house gangways leave no margin before a gate starts to bind. We reset the footing and realign the gate. This alone fixes a large share of the sagging calls we get.
- Rusted or painted-over hinges and latches on original wrought-iron gates. Decades of repainting seize the moving parts until the gate won’t swing through its arc. We free, re-pin, or replace the hardware and restore smooth operation.
- Wood gate rot and lead paint on older row-house gates. Older wood gates need safe handling, and where a section is too far gone we fabricate a replacement part rather than tear out the whole gate.
- Operator and automation faults on automatic gates. Boards, photo eyes, and low-voltage wiring fail, and the gate goes dead or refuses to close. We diagnose the electrical side and the mechanical side together, so the fix holds.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Baltimore, MD
Honest pricing means a range up front. Gate repair in Baltimore typically runs $180 to $350 for hinge, latch, and lock work; $200 to $500 for welded or fabricated iron repairs; $250 to $600 for realignment and post work; and $300 to $800 for electric gate repair involving operator boards, photo eyes, or wiring. Rust treatment and refinishing prep usually lands between $150 and $400 depending on gate size. What moves the number is the condition of the gate, the amount of fabrication, and whether the work is mechanical only or automation too. The estimate is free. We quote per job, agree the price in writing before any work starts, and the written estimate sets the final price. Call (855) 356-2557 for an exact quote – estimates are free.
We Also Serve Cities Near Baltimore
Alongside our work across Baltimore, we send technicians to Honeygo, Kingsville, North Laurel, and Herald Harbor. If you’re just outside the city and your driveway gate needs attention, call and we’ll confirm coverage for your address. Our gate repair team handles both manual and automatic systems throughout the area.
Serving Baltimore, MD – Our Local Coverage Area
We serve Baltimore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Baltimore
Yes, in most cases a broken custom latch can be repaired or fabricated without replacing the gate. In Canton and Fells Point, these latches are often handmade originals with no off-the-shelf match, so we either fabricate a replacement from a salvaged pattern or find one at a local architectural salvage yard. The gate itself usually only needs the latch rebuilt and the hinge eyes checked. Call (855) 356-2557 for a free estimate.
Freeze-thaw cycles over the winter shift the ground around the hinge post, and the movement shows up as a sag once the ground dries out in summer. The post settles slightly and the gate starts to bind on its swing. We reset the footing and realign the gate so it swings true again. Call (855) 356-2557 to book a look.
Yes, we install and repair safety photocells on automatic gates throughout Baltimore. Photo eyes sit on the electrical side of the gate system, and we diagnose both the low-voltage wiring and the mechanical side together, so the safety devices work reliably with the operator. Call (855) 356-2557 for a free estimate.
Yes, tight alleys between row houses are exactly where a lot of our work happens in this city. We work in narrow gangways and rear passages where space is limited, and we carry the diagnostic tools and parts to handle most operator repairs on the first visit. Electric or manual, we work around the space we’ve got. Call (855) 356-2557 to schedule.
The best prevention is to catch rust at the seam before it spreads and keep the protective coating intact. Baltimore’s hot, humid summers accelerate corrosion, so any spot where paint has chipped should be treated and recoated. We can assess the gate, prep rusty areas back to sound metal, and refinish to hold the rust back. Call (855) 356-2557 for a free estimate.
Get Your Baltimore Gate Back in Working Order
Whether it’s a seized cast-iron latch, a sagging post, or an operator that’s gone dead, we diagnose the whole gate, not just the part that broke. Call (855) 356-2557 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by Glenn Fitzgerald, Owner at Baltimore Gate Repair, serving Baltimore since 2016.