Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Fulton, MD
If you’re pricing a new automatic gate for a long driveway off Route 216 or a horse-farm entrance near Mapleville, the job in Fulton looks nothing like a suburban yard gate. Fulton’s large-lot and estate properties call for wide swing and slide gates that have to open reliably across freeze-thaw winters and long exterior power runs. We’re a gate-only company: Gate Installation is the work most Fulton owners call us for, and it starts with a free on-site measure and a written price before anything is ordered. Call (855) 356-2557.
Why Fulton Homes Are Different
Fulton sits in the planned-community belt of western Howard County, and almost all the gate work here is on privately maintained residential and equestrian systems rather than municipal infrastructure. That changes the job. The housing stock is dominated by large single-family homes on multi-acre lots, low-density estate subdivisions, and working horse farms along the Mapleville Ridge area, so we see wide driveway gates, ranch-style entry gates, and heavy agricultural gates far more often than a standard residential yard gate.
The ground matters as much as the gate. Western Howard County’s freeze-thaw cycles are hard on gate hardware: hinges and operators that sit in wet, shaded ground freeze and bind in winter, and spring ground heaving misaligns posts on these long rural drives. On top of that, operators on large-lot and farm properties run on long exterior conduit across gravel or field, which makes buried-line faults and voltage drop at distant driveway entrances far more common than a failed operator motor. If your address is in the 20759 area and your gate sits at the end of a quarter-mile drive, that’s the reality we plan around.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Fulton Services
Two jobs account for most of the calls we get from Fulton homeowners, farm managers, and property managers: fixing a gate that’s stopped working and repairing the electric systems that drive it.
Gate Repair in Fulton
Manual and mechanical gate repair in Fulton means dealing with the conditions these wide rural entrances produce. Heavy panels that have dropped on sagging hinges, slide gates that jump the track on a heaved post, and ranch gates that bind every winter because the ground moved. On multi-acre properties the gate is often far from the house, so we start by confirming whether the problem is the gate itself or the mounting underneath it. Read more about Gate Repair in Fulton, or call (855) 356-2557 and we’ll set up a time to look at it in person.
Electric Gate Repair in Fulton
Electric gate repair in Fulton is where the long conduit runs really show. On these large-lot and farm properties, operators on FAAC or BFT equipment are frequently blamed for a problem that’s actually a buried-line fault or voltage drop at a distant driveway entrance. We diagnose both sides of the system, the low-voltage automation and the mechanical gate, rather than guessing at the board. If your operator cycles but the gate stalls, or the arm won’t move at all, see Electric Gate Repair in Fulton. Call (855) 356-2557. We answer 24/7.
Gate Installation in Fulton
New gate installation in Fulton is a measured, ordered, and scheduled job, not a same-day repair. The homes here sit on multi-acre lots with wide, long driveways, and western Howard County’s freeze-thaw cycles mean the gate and its posts have to be set to handle heaving ground. We visit the property, measure the opening, plan the power run to wherever the gate actually sits, and quote a written price before we order anything. Whether you want a new automatic entrance or a replacement for a failing gate, we handle the whole scope through our Gate Installation work, from the gate and posts to the operator and safety edges.
Automatic Gate Installation
Signs you need it
You’re opening a heavy driveway gate by hand every time you come home, or your old operator has reached the point where parts and cycles no longer add up.
What it costs in Fulton
Automatic gate installation in Fulton typically runs $4,500 – $9,500 for a driveway swing or slide gate with a residential operator, and the written estimate sets the final price once we’ve measured the opening and traced the power run.
How we do it
We measure the opening and grade, check where power has to reach the gate, set posts to proper footing depth, mount the gate and operator, then run and test the low-voltage side and the safety edges before we hand it over.
Driveway Gate Installation
Signs you need it
Your existing driveway gate has cracked or warped past repair, or you’re adding a barrier at the end of a long rural drive for the first time.
What it costs in Fulton
Driveway gate installation in Fulton typically falls between $3,000 and $12,000 depending on span, material, and whether an operator and power run are included, with the final figure set by the written estimate.
How we do it
We lay out the opening to match the drive and its slope, set the posts for long-term stability in heaving ground, hang the gate, and align it so it swings or slides clear of the grade through a full cycle.
What Gate Installation Costs in Fulton
These are typical ranges for the work, not a quote. The written estimate you get after we measure your opening and trace the power run is the price that counts.
| Item | Typical range in Fulton |
|---|---|
| Automatic gate installation (driveway swing or slide with operator) | $4,500 – $9,500 |
| Driveway gate installation (gate, posts, alignment) | $3,000 – $12,000 |
| Sliding gate installation | $4,000 – $10,500 |
Can you install a gate at the end of a long Fulton driveway?
Yes, and it’s common here. Long drives mean planning the power run and conduit distance carefully so the operator gets steady voltage, and setting posts for heaving ground. Call (855) 356-2557 for a free measure.
Do I need a permit to install an automatic driveway gate in Fulton?
Most cities and Howard County require a permit for a new gate and its electrical connection, so ask the county and your HOA before work starts. We build to the plan and a written price. Estimates are free.
Brands We Service in Fulton
We’re factory-familiar with nine major gate and operator lines, including FAAC, BFT, Linear, and Viking, and we carry brand-specific parts and diagnostic know-how that a generalist won’t have on the truck. We work on the brand you already have. Nine brands, one specialist, and turnaround that starts with a diagnosis rather than a guess. See our brands. Call (855) 356-2557.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Fulton, MD
These typical ranges cover the gate work Fulton properties call about. Only the job-specific figures that apply to your gate are confirmed in the written estimate.
| Service | Typical range in Fulton |
|---|---|
| Automatic gate installation (driveway swing or slide with operator) | $4,500 – $9,500 |
| Driveway gate installation | $3,000 – $12,000 |
| Sliding gate installation | $4,000 – $10,500 |
| Gate installation (manual) | $1,800 – $6,000 |
| Gate repair (mechanical) | $180 – $650 |
| Gate operator repair | $250 – $900 |
| Gate spring-free hinge and hardware repair | $150 – $450 |
| Electric gate diagnosis and repair | $200 – $850 |
| Buried-line and conduit fault repair | $300 – $1,200 |
What pushes the price up in Fulton is the same thing that makes the work here different: long power runs across gravel or field, heavier agricultural and ranch gates, and posts that have to be reset after heaving ground. We quote every job upfront and agree the price before any work starts, so the invoice matches the estimate.
Neighborhoods We Serve in Fulton
We work gate jobs across the Fulton area, from the large-lot estate subdivisions to the working horse farms and rural properties along the Mapleville Ridge area. Because these drives are long and spread out, we plan the visit around your gate’s location and the power run, and we confirm a time when you call.
- Mapleville Ridge area
- Estate subdivisions on multi-acre lots
- Working horse farms off Route 216
- Rural properties in the 20759 area
Service Area – Cities Near Fulton
Fulton sits in western Howard County, and we cover the towns around it. If you’re in Konterra, MD, West Laurel, MD, North Laurel, MD, or Gambrills, MD, we handle gate installation and repair there too. Call (855) 356-2557 to confirm your address and set up a free measure.
Serving Fulton, MD – Our Local Coverage Area
We serve Fulton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fulton
Yes. We cover the estate subdivisions, the horse farms along the Mapleville Ridge area, and the rural properties in the 20759 area. Call (855) 356-2557 with your address. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Building permits and HOA approval for a new gate are the property owner’s responsibility, so ask the county and your association first. We build the gate to the approved plan and quote a written price before ordering. Estimates are free.
We answer the phone 24/7 and dispatch crews Sunday through Friday, 7am to 7pm, closed Saturday. A call outside dispatch hours is booked into the next opening. Call (855) 356-2557 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Fulton Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Cedric Prince"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Latoya Whitfield"Three other companies in Baltimore either didn't pick up or wanted to schedule me for the following week. These guys had someone out the next morning."
- Dustin Hoffman